百特科技-MELF RESISTOR(Metal Film MELF)圓柱型晶片電阻

     Specifications per
       ● IEC 60115-1, IEC 60115-2       ● EN 140401-803
     Features

      ● SMD enabled structure
      ● Excellent solderability termination
      ● Reach & RoHS Compliance

Series / Type	Features	Power Rating	Ohm Range	Tolerance
CM	Carbon Film MELF Resistor 碳膜貼片電阻 ● Excellent solderability termination ● Products meet RoHS requirements and do not contain substances of very high concern identified by Europeann Chemicals Agency	1/4W~1/2W	0, 0.51R ı 10M	±5%
CSM	Current Sense MELF Resistor 電流感測(採樣)晶圓電阻 ● High power handling with superior reliability and stability ● Conformal multi-layer coating against humidity ● SMD enabled structure with excellent solderability ● HeatSinker™ Technology for better heat dissipation ● Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency	1/4W~3W	10mR ı 510R	±1~5%
EFP	Enhanced Film Power MELF Resistor 功率型圓柱貼片電阻 ● High power handling ● Superior reliability and Stability ● SMD enabled structure with excellent Solderability ● Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency	1/2W~5W	0, 0.51R ı 10M	±0.5~5%
ESM	ESD Surge MELF Absorber 圓柱貼片型靜電突波吸收器 Protects through sparking over the porous layer when surge exceeds the spark-over voltage ● Patented construction with reduced costs ● High insulation resistance, low capacitance, and fast response time	[80A@2/10uS] [60A@8/20uS] 　 Surge Current Capacity	1300V DC Spark-Over Voltage	±30%
FM	Fusible MELF Resistor 可熔斷圓柱貼片電阻 ●Excellent solderability termination ●Fusees within 10 sec.at 9.8W -10.5W	1/3W~1/2W	2.2R ı 10K	±5%
HFT	High Frequency Terminator Resistor 高頻電阻 ● Superior frequency response ● Excellent solderability termination ● Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency	1/4W~2W	24R9 ı 75R	±5%
MM	Metal Film MELF Resistor 金屬膜晶圓電阻 ● Excellent solderability termination ● Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency	1/6W~1/2W	0, 0.51R ı 10M	±1% ±2% ±5%
MM (P)	Metal Film MELF Resistor (Pulse Withstanding) 耐突波型金屬膜晶圓電阻 ● Excellent solderability termination ● Typical 10us maximum pulse load: 32W~70W ● Typical temperature coefficient: 5ppm~50ppm	1/6W~1W	10mR ı 1M	±0.1% ±0.25% ±0.5%
MM 102	Metal Film MELF Resistor - 0102 packing 金屬膜晶圓電阻 - 0102封裝 ● Excellent solderability termination ● Typical temperature coefficient: 25ppm~100ppm	0.2W	0, 0.22R ı 2.2M	±0.5~5%
SFP	Stabilized Film Power MELF Resistor 穩定功率型晶圓電阻 ● Low temperature coefficient and tolerances ● Excellent stability ● Superior power handling ● Typical temperature coefficient: 50ppm~200ppm	1/2W~3W	0R5 ı 10M	±0.5~5%
SM	Stabilized Metal Film MELF Resistor 穩定型晶圓電阻 ● Conformal coating against humidity ● Excellent solderability termination ● Typical 10us maximum pulse load: 32W~70W ● Typical temperature coefficient: 25ppm~100ppm	1/6W~1/2W	0R51 ı 10M	±1~5%
SWM	Anti-Surge Wire wound MELF Resistor 抗突波繞線圓柱貼片電阻 ● Flameproof multi-layer coating meets UL 94 V-0 ● Flameproof feature meets overload test UL 1412 ● Enhanced weld spot is reliable against surge ● Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency ● SWM series is applied in high surge applications such as high rush current protection for power capacitor, motorz start-up protection, car & motorcycle engine ignition, etc. to bsorb harmful surge energy, so to prevent hazard of circuit damage caused by surge energy	1W-4W	0R1 ı 1K2	±5%
SWMT	Anti-Surge Wire Wound Fast-Fuse MELF Resistors 抗突波繞線可熔斷貼片電阻 • Worldwide patent pending • Enhanced welded spot is reliable against surge • Fast-acting fuse device for high-power applications • Advanced combined anti- surge & fast-fuse structure • Flameproof multi-layer coating equivalent to UL 94 V-0 • Flameproof feature equivalent to overload test UL 1412 • Thermal fuse to protect against over-heating in electronic products	1W-4W	1R ı 470R	±5%
ZMM	Zero Ohm Metal Film MELF Resistor 跳線金屬膜晶圓電阻 ● Excellent solderability termination ● Stable metal film Construction	2A-4A [Maximum Current]	< 20mR	N/A
HVM	High Voltage MELF Resistor 高壓圓柱貼片電阻 ● Handles much higher working voltage than general purpose resistors ● Pure tin-plated termination for excellent solderability ● SMD enabled structure ● Anti-surge feautre available ●VDE0860 Compliance ● Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency	1/6W-3W	56K ı 68M	±1~5%
MVM	Medium Voltage MELF Resistor 中高壓晶圓電阻 •Handles much higher working voltage than general purpose resistor •Pure tin-plated termination for excellent solderability •SMD enabled structure •Anti-surge feature available •Product meet RoHS requirements and do not contain substance of very high concern identified by European Chemicals Agency	0.4W-1W	334K ı 40M	±5
ICS	Ignition Noise Suppression Resistor (Ceramic Film Composite Type) • Dedicatedly designed for high-voltage spark ignition systems •Proprietary ceramic composite withstands high-voltage surge impact with long term stability.one of few sources in the world.	1/2W-3W	1K ı 10K	±5~20%